====== iLive Basics ======
=== Walkthrough and Reference ===

==== Getting Started ====
== Applicable to Barracks Row ==
=== Lay of the Land ===
List of the major Audio components and their //locations//:
  * Stage Boxes - //Various locations on the Stage//
      * XLR inputs - labeled to match console labels
      * Aviom - Cat5 sockets to drive Avioms
  * Input Gear 
      * Mics, Cables, DIs, Worship Wireless Mics - Stage Right under the screen
      * Wireless Handhelds, Beltpacks - //Production Booth rack drawer in corner//
  * FOH Power - //Bottom of the rack below audio console//
  * Control System Touch Panel - //FOH and Production booth//

=== Startup ===
  - Press “Power” button on //FOH Power// battery backup (near floor under console)
  - After console boots up - Load your scene
      - BARRACKSROW - //Church or Large Bands//
      - Small Show - //Small Groups, Prayer Nights, Q/As, other small events//
      - CR - //Celebrate Recovery//
  - Unmute PA - //Control System Touch Panel//
=== Shutdown ===
  - Mute PA - //Control System Touch Panel//
  - Properly Power down Console - Press **“Utility”** button - **“Power Down”** on screen - **“Power Down Surface”** on Screen - Power Button on //FOH Power//
  - Replace Dust Cover
  - Clear Stage - Put away all mics, cables, DIs, and stands
 
==== Routing ====
=== Inputs ===
  * iMac Input - “MINI”
  * Headphone Jack - “⅛” ”
  * Wireless Mics
      * Handhelds - Hand1, Hand2
      * Beltpacks - Belt1, Belt2
      * Worship Handhelds - WRLS1, WRLS2, WRLS3, WRLS4
  * Tracks - 8 tracks channels via Dante from Chris
=== Channel Strip ===
  * Select - //Located above the fader// 
      * Selects channel for further operations
      * Press before taking other actions
  * Gain - //Top left of the Console//
      * Turn down if red “Peak” light illuminates on channel
  * EQ - //Center Left of the Console//
      * 4 bands adjusted by Gain, Frequency, and Width (Q)
  * Compression - //Center of the Console//
      * Adjusted by Threshold, Ratio, Attack, Release, Hold, and Gain
  * Fader - //Divided into 2 banks of 4 layers each//
  * DCAs - //Control level multiple individual channels//
      * Drums - Control all drums (colored Yellow)
      * Vocal - Control all vocals (colored Red) **excludes handhelds/beltpacks
      * Inst - Controls all Instruments (colored Green)
      * FX - Controls all Effects Returns (colored Purple)
=== Outputs ===
  * Klang
      * Standard Inputs - //Pre-Routed (should cover 95% of needs)//
      * Additional Needs - //Use “Klang” Aux by pressing the “Mix” button and increasing the faders of the desired inputs//
  * Avioms - Route 16 available channels via “Output” screen 
  * FX/Surrounds - Right Bank, Layer B
      * Mix FX “Ip” using the “Mix” button
      * “Surround” Aux sends to cinema surround speakers - Mix using “Mix” button