GLD Basics

Un-case GLD - Either on Table or in standing rack
Connect dSnake - Connect GLD surface to the stage rack using a Cat5/6 connected the “dSnake” on each device
Power On - Ensure both the GLD surface and stage rack are plugged in and powered on
Connect Mini Audio - Connect XLR outputs on the Radial USB DI to the inputs on the back of the GLD surface
Test Audio - Play music from ProPresenter to test the Mini Input and Speakers

Recall Scene - On the “Scene” screen select _Your Campus__ Start > “Recall” > “Yes”
Disconnect Mini Audio - Disconnect and wrap XLR from USB DI
Shutdown Console - On the Processing screen (deselect everything) select Shutdown > Yes
Disconnect dSnake - Unplug and wrap dSnake cable
Power Off - Unplug GLD Surface and switch off stage rack

Mini Input - “MINI L” and “MINI R”
- Ganged together EXCEPT Gain, adjust Gain independently
Headphone Jack - “⅛” ”
Wireless Mics
- Handheld - Hand1
- Beltpack - Belt1

Select - Located above the fader.
- Selects channel for further operations
- Press before taking other actions
Gain - Top left of the Console
- Turn down if red “Peak” light illuminates on channel
EQ - Center Left of the Console
- 4 bands adjusted by Gain, Frequency, and Width (Q)
Compression - Center of the Console
- Adjusted by Threshold, Ratio, Attack, Release, Hold, and Gain
Fader - Divided into 2 banks of 4 layers each
DCAs - Control level multiple individual channels
- Drums - Control all drums (colored Yellow)
- Vocal - Control all vocals (colored Red) **excludes handhelds/beltpacks
- Inst - Controls all Instruments (colored Green)
- FX - Controls all Effects Returns (colored Purple)