✎ video [NCC Production]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Video ======



CCLI Template Tutorial
The following tutorial walks through how to correctly set the CCLI information template in ProPresenter 6.

1 - Open CCLI settings:
ProPresenter 6> Preferences> General> CCLI Layout> Edit Template

2- Check Resolution
After opening the editor, in the top right of the workspace view, the current size of the template will be displayed.  This resolution should match the output resolution of ProPresenter.  If they aren’t the same, it will scale your template up or down changing the look.  

Here’s what it will indicate when it’s not matched:

Select the corresponding resolution to your main output. 
(most often 1280x720)





3 - Set Textbox Settings
The correct settings should be:
	-20pt font in DIN MEDIUM, right justified
	-Text box at the bottom right of the slide
-Text box should be stretched far enough left to accommodate as much text as possible without overlapping the sermon series graphic that typically populates the bottom left of the screen.

Here is an example of how it should look:


4- Check Final Product
Here’s what the final product should look like: